Changzhou Inktek Decorative Materials Co., Ltd

In this age of interior decoration, Marble Film has become the opinion of more and more people because of its high cost-performance ratio, easy installation and fashionable appearance. Marble Film can easily give luxurious marble texture to the surface without spending much money or complex construction, whether it is home decoration or commercial space renovation. However, during the construction process, many people, because of improper operation or neglect of details, the installation effect is not ideal or even shorten the service life of the film.

Therefore, to better assist users in achieving the optimal decorative effect, we will focus on this topic, "Common Mistakes to Avoid When Installing Marble Film", creating an in-depth analysis of the process of film installation common errors, and to avoid mistakes in the operation guide, so that your film installation projects can be successfully completed. When using PVC floor film, decorative floor film, or other Marble Film, the following tips may offer you effective guidance.

1. Neglecting Surface Cleaning and Preparation

Common Mistakes:

When installing Marble Film, many people overlook the importance of surface cleaning and directly apply the film to surfaces with dust, oil stains, or unevenness. This will cause the film to fail to adhere firmly, resulting in bubbles, wrinkles, and even peeling off in a short period of time.

Correct Practice:

Before installation, ensure that the surface is completely clean, flat, and free of oil stains. You can use a mild cleaner to clean the surface and dry it with a dry cloth.

If it is an old floor or wall, it is recommended to repair the cracks or uneven areas first to ensure that the film has a smooth base.

2. Not Measuring or Cutting the Film Precisely

Common Mistakes:

To save trouble, some people do not measure and cut the film and the surface accurately before construction. So, it will lead the film to be too small or too large, thus affecting the final effect, at the same time may also waste materials.

Correct Practice:

Measure the surface where you plan to install Marble film, and allow a margin (usually 1-2 cm) for the edges.

Use a ruler and a sharp utility knife for precise cutting to ensure smooth and neat edges.

3. Ignoring the Step of Removing Air Bubbles

Common Mistakes:

Air bubbles are one of the most common issues that can arise while applying film. If the air bubbles are not overwritten in time, the surface of the film will look uneven, and the decorative effect will be affected.

Correct Practice:

Apply the film from one end, and press it on slowly. Gently smooth the film and expel the air bubbles with a squeegee or the edge of a credit card.

In the event that air bubbles exist after the film is completely attached, you can prick the bubbles with a needle and with the squeegee to squeeze air.

4. Using the Film on Unsuitable Surfaces

Common Mistakes:

Some users attempt to apply Marble Film to a rough or porous surface, such as untreated wood or walls with obvious textures. This film will not be able to fully enter into contact, which has an impact on its service life.

Correct Practice:

Marble Film is most suitable for application on smooth and non-porous surfaces on glass, metal, polished wood.

In case you have to use it on uneven surfaces, it is preferable to cover it first with a layer of primer or sand the surface with sand paper to make it more even.

5. Ignoring the Influence of Temperature and Humidity

Common Mistakes:

Setting up the film in too hot or too cold setting and installing it on a damp surface will affect how well the film adheres to the surface and can lead to raised edges or more air bubbles.

Correct Practice:

The ideal ambient temperature for the installation of Marble Film is 20°C to 30°C, and the humidity is moderate.

The installation of the film must NOT be done on a wet surface or in an outdoor environment with high humidity. Surface drying is required if there is any moisture on the surface before operation.

6. Using the Wrong Auxiliary Tools

Common Mistakes:

During the film application process, using inappropriate tools (such as ordinary hard objects or rough tools) to scrape the film may cause scratches or damage to the surface of the film.

Correct Practice:

Use professional squeegees, soft cloths, or rubber tools to avoid scratching the surface of the film.

If it is a large area of PVC floor film or decorative floor film, you can consider using a flattening roller tool to improve efficiency.

7. Being Unfamiliar with the Performance and Characteristics of the Film

Common Mistakes:

This is because there are different types of Marble Film in terms of thickness, adhesiveness, and applicable scenarios. If you install it blindly, and you have not learned about the product characteristics, the film may not be suitable for the target surface or do not reach the expected effect.

Correct Practice:

Make sure you normally read the relevant description of the product before making use of so that you have basic concept of touch, variety, characteristics and installing of Marble Film.

If it is a film used for floors, such as PVC floor film, ensure that its anti-slip and wear-resistant properties meet the requirements.

8. Ignoring Edge Treatment

Common Mistakes:

After the installation is completed, many people neglect the treatment of the edges of the film, resulting in the edges curling up or not adhering firmly.

Correct Practice:

Use additional adhesive at the edges of the film to ensure that it is firmly fixed.

Use a squeegee to gently press along the edges and ensure that the edge parts are completely attached to the surface.

Conclusion

Installing Marble Film may seem simple, but to achieve a perfect decorative effect, it is crucial to avoid common mistakes. From surface cleaning and precise measurement to using the correct tools and methods, every step requires care and patience. By avoiding these common mistakes, you can not only extend the service life of the Marble Film but also bring a more stylish and professional appearance to your space.