Changzhou Inktek Decorative Materials Co., Ltd

Today's world is an era of pursuing sustainable development, with new materials and new energy emerging in an endless stream. Stone plastic floor is the only floor decoration material that can be recycled, which is of great significance for protecting our earth's natural resources and ecological environment. Stone plastic floor gradually led the world trend and became a widely used new type of floor decoration material. It is popular in the European and American markets and the Asia-Pacific market. It is also very popular in China and has a very broad development prospect.

Maintenance and maintenance of stone plastic floor:

Stone-plastic floor maintenance is very convenient. If the floor is dirty, just wipe it with a mop. If you want to keep the floor bright and shiny for a long time, you only need to wax it regularly. The maintenance frequency is much lower than on other floors.

1. Purpose of cleaning and maintenance

1. Improve the appearance: timely remove the dirt generated in daily use, so that the stone plastic floor can fully show its extraordinary appearance and natural gloss.

2. Protect the floor: protect the stone plastic floor from the erosion of accidental chemicals, cigarette butts, shoe prints, oil, and water, etc., minimize the mechanical wear of the surface, and give full play to the durability of the floor itself, thereby extending the service life of the floor.

3. Convenient care: Due to the tight surface structure and special treatment of the stone plastic floor itself, pay attention to daily cleaning and maintenance, which can make the floor easier to care for and extend its service life.

2. Care precautions

1. Various dirt on the ground should be removed in time.

2. It is absolutely forbidden to soak the floor in open water. Although some floors use waterproof glue to block the water source (such as floor drains, water rooms, etc.), long-term soaking in water will seriously affect the service life of the floor. Use a water suction machine to suck up the sewage in time during the cleaning process.

3. For places with more traffic and greater wear, the maintenance cycle should be shortened and the number of waxing times of high-strength surface wax should be increased.

4. It is absolutely forbidden to use hard and rough cleaning tools (such as steel wool, scouring pads, etc.) to prevent sharp objects from colliding with stone-plastic floors.

5. It is strongly recommended to place foot pads at the entrances of public places with high traffic to prevent dirt and sand from staining and scratching the floor materials.

3. Maintenance methods at different stages:

(I) After the floor is laid, clean and maintain before use

1. Remove dust and debris from the floor surface first.

2. Use a floor scrubber with a 3M red grinding disc or similar products to clean at low speed (dilute strong general-purpose cleaner with water at a ratio of 1:20 and add it to the floor scrubber), remove protective wax, grease, dust and other dirt on the floor surface, and use a water absorber to absorb the dirty water.

3. Rinse with clean water and absorb dry.

4. Apply 1-2 layers of high-strength surface wax as needed.

Cleanser: strong general-purpose cleaner, high-strength surface wax

Tools: floor scrubber, red grinding disc, water absorber, wax mop, water squeezer

(II) Daily cleaning and maintenance

1. Push dust or vacuum cleaner. (Put the mop dust-retaining agent on the mop, and push dust after drying.)

2. Wet mop. (Dilute floor cleaning polish with water at a ratio of 1:20, and mop the floor with a semi-wet mop.)

Cleaning agent: floor mop dust-removing agent, floor cleaning polish

Tools: dust pusher, mop

(III) Regular cleaning and maintenance

1. Dust pusher or vacuum cleaner.

2. Dilute floor cleaning polish with water at a ratio of 1:20, and mop the floor or use a high-speed polisher with a red grinding disc for grinding.

3. Apply 1-2 layers of high-strength surface wax.

4. If necessary, you can use a high-speed polisher with a white polishing pad for polishing.

Cleaning agent: floor cleaning polisher, high-strength surface wax

Tools: dust pusher, floor grinding machine, red and white grinding discs, water absorber, wax mop water squeezer

(IV) Thorough renovation

1. Dust pusher or vacuum cleaner.

2. Dilute the strong wax removal water 1:10 and apply it evenly on the floor. Wait for 5-10 minutes, and use a floor scrubber with a red grinding disc to clean and remove wax at low speed. Use a water absorber to absorb the sewage in time.

3. Rinse with clean water and absorb until there is no residual detergent left on the floor.

4. Apply 1-2 layers of high-strength surface wax as needed.

Cleaning agent: floor cleaning polish, high-strength surface wax

Tools: dust pusher, floor grinder, red and white grinding discs, water absorber, wax drag water squeezer

(V) Treatment of special dirt

1. Oil stains: For local oil stains, pour the original liquid of water-based degreasing agent directly on a towel and wipe; for large-area oil stains, dilute the White water-based degreasing agent at 1:10 and use a floor scrubber with a red grinding disc to clean at low speed.

2. Black offset printing: Polish with spray cleaning maintenance wax and a high-speed polishing machine with a white polishing pad. For long-term black offset printing, you can pour a strong black offset printing remover directly on a towel and wipe it off.

3. Glue or chewing gum: Pour a professional strong glue remover directly on a towel and wipe it off.